ZhengZhou Kaier Kiln Refractory Co.,Ltd

정저우 카이어 화로 다루기 힘든 주식회사

 

전문적 내화 연와 공급자

높은 임시 1600 도 0.8g/Cm3 가마 내화 연와

높은 임시 1600 도 0.8g/Cm3 가마 내화 연와

High Temp 1600 Degree 0.8g/Cm3 Kiln Refractory Bricks
High Temp 1600 Degree 0.8g/Cm3 Kiln Refractory Bricks

큰 이미지 :  높은 임시 1600 도 0.8g/Cm3 가마 내화 연와

제품 상세 정보:

원래 장소: 허난 엑스인미
브랜드 이름: Kaier
인증: ISO9001
모델 번호: 킬른 다루기 힘든 벽돌

결제 및 배송 조건:

최소 주문 수량: 50ton
가격: Negotiated
포장 세부 사항: 내화 벽돌을 위한 목재 파렛트 ; PE 톤은 다루기 힘든 케스타블을 위해 불룩해집니다 ; 금속 또는 판지로 만드는 앵글 비드는 스트랩으로 잠깁니다 (쿠스토미즈드 패키징이 이용 가
배달 시간: 5-8 작업 일
지불 조건: L/C (신용장), 전신환, 웨스턴 유니온
공급 능력: 달 당 5000Ton
상세 제품 설명
상품 이름: 킬른 다루기 힘든 벽돌 형태: 직사각형
Al2o3 내용 (%): 48 - 55% 재료: 고 알루미나 분말
애플리케이션: 산업 화로 & 노 대량 조밀도: 0.8g/Cm3
타입: 벽돌을 격리하는 구멍 타입 임시 직원: 1600 급
하이 라이트:

0.8g/Cm3 Kiln Refractory Bricks

,

1600 Degree Kiln Refractory Bricks

,

0.8g/Cm3 high temp bricks

High Temp 1600 Degree 0.8g/Cm3 Kiln Refractory Bricks

 

Introduction of Kiln Refractory Bricks


Kiln Refractory Bricks has the advantages of high strength, good thermal stability, small change of heavy burning fiber and small thermal conductivity. The high alumina poly light insulation brick has a content of AL2O3 of more than 48%, which is mainly composed of mullite and glass phase or corundum. The bulk density is 0.4 to 1.35 g/cm3. The porosity is 66% to 73%, the compressive strength is 1-8 MPa, the fire resistance temperature is 1600 degrees, and good thermal shock resistance.


Features of Kiln Refractory Bricks

 

1. High temp resistance,

2. Good corrosion resistance,

3. Good thermal shock resistance,

4. Good abrasion resistance,

5. High strength,

 

Specification of Kiln Refractory Bricks

 

Item

Specification

LTL-0.6

LTL-0.8

LTL-1.0

LTL-1.2

Density Bulk(g/cm3)

0.6

0.8

1

1.2

Cold Crushing Strength(Mpa)

2

3.98

4.98

5.98

Reburning Linear Change%(℃*h)

1350*12

1400*12

1400*12

1450*12

Thermal Conductivity(w/m.k 350+-25℃

0.25

0.29

0.35

0.45

Al2o3

50

50

55

55

Fe2o3

1.8

1.8

1.8

1.8

 

Kiln Refractory Bricks Pictures

 

높은 임시 1600 도 0.8g/Cm3 가마 내화 연와 0

High Alumina Poly Light Insulation Brick Application


High alumina poly light insulation brick is widely used in kiln lining (not eroded by solution) and insulation layer in metallurgy, machinery, ceramics and chemical industries. It is an ideal energym saving product.
High alumina poly light insulation brick is used for the lining and insulation of masonry furnaces, as well as the areas where there is no strong high temperature molten material erosion and erosion. When in direct contact with the flame, the surface contact temperature shall not be higher than 1350℃
High alumina poly light insulation brick used in ceramic tunnel kiln, roller kiln, shuttle kiln, wall kiln, also used in various heating furnace coking furnaces and other thermal equipment, heat treatment lining materials, etc.

 

High Alumina Poly Light Insulation Brick Requirement


(1) The thermal stability under long-term high temperature working conditions is good
(2) The wear resistance in the work should be good, and the strength under normal temperature and high temperature conditions should be high.
(3) The density is high, the thermal conductivity is small, and the thermal insulation performance is good.
(4) It can resist the severe erosion and erosion of molten iron, slag, blast furnace gas and furnace dust under high temperature and high pressure, and is resistant to various atmospheric corrosion.
(5) The size of the refractory material should be accurate and in line with national standards, which is conducive to the construction of the blast furnace.

 

연락처 세부 사항
ZhengZhou Kaier Kiln Refractory Co.,Ltd

담당자: Mika

전화 번호: 86-15981951014

회사에 직접 문의 보내기 (0 / 3000)

저희에게 연락하십시오 빨리